3″ 4/100mm Wheel Spacers (Yamaha Blaster 200)

$120.00

Yamaha Blaster 200 Compatible

These wheel spacers are made from Extruded Billet 6061-T6511 aluminum. Heat treated for added strength, they have been designed to be lightweight, but optimized for strength.

One order = One Pair (2 Spacers)

The Premium Wheel Spacers provide 2 inches of spacing per side (4 inches total).  This matches up very well with our widening kits, whether you use the +4.5″ or +6.0″ setting. 

SKU: 4/100_3 Category: Tags: , , , ,

These wheel spacers are made from Extruded Billet 6061-T6511 aluminum. Heat treated for added strength, they have been designed to be lightweight, but optimized for strength.

One order = One Pair (2 Spacers)

The Premium Wheel Spacers provide 2 inches of spacing per side (4 inches total).  This matches up very well with our widening kits, whether you use the +4.5″ or +6.0″ setting. 

The bolt pattern on these spacers is 4 bolts with the centers of each bolt on a 100mm diameter circle, and is used on all Yamaha Blasters.  Measure the center to center distance across opposite studs on your rear wheels to determine if these will fit.  100mm is just under 4 inches.

 

Known applications for these wheel spacers (on rear axle unless otherwise noted):

Yamaha Blaster 200

 

On the Premium Wheel Spacers, notice how the lettering and diamond symbol is engraved into the face to give a custom aluminum wheel look.  The spacers will come to you in the bare polished aluminum. If you like the colored accent look you can spray and sand the front surface to give the custom inlay look!

Weight5 lbs
Dimensions7 × 6 × 7 in
Shopping Cart